At BRICKED UP DESIGNS, we take the durability and reliability of our mounts very seriously. Each mount is tested multiple times to ensure it can maintain the weight of the set it is designed to support. We go above and beyond to ensure each mount can withstand weights exceeding the original specifications of the set. This rigorous testing process guarantees that our customers receive high-quality, reliable products that provide both safety and stability for their displays.

As of now we offer black, white and SPACE GRAY. If you have a specific color request or need, we encourage you to reach out to us through our website.

How to Install the Drywall AnchorsStep 1: Mark Your Mounting LocationsPosition your wall mount in the desired location and use a pencil to mark the center of each mounting hole.Step 2: Start the Drywall AnchorsPosition the tip of each supplied 50 lb metal drywall anchor directly over your marked locations.If you have a drill, you can make a small pilot hole to help start the anchor. The pilot hole should only be large enough to help guide the tip of the anchor into the drywall. Do not drill a hole as wide as the anchor itself.If you do not have a drill, you can carefully press the pointed tip of the anchor into the drywall using firm thumb pressure until it begins to bite into the surface.Make sure the anchor starts straight and perpendicular to the wall. If it begins going in at an angle, stop and straighten it before continuing.Step 3: Install the Drywall AnchorsOnce the anchor has started into the drywall, use a screwdriver to slowly turn it clockwise until it is fully seated.The head of the anchor should sit flush with the surface of the drywall. Do not overtighten or continue forcing the anchor once it is seated.Step 4: Attach the Wall MountPosition the wall mount over the installed anchors and align the mounting holes.Insert the supplied screws through the wall mount and into the drywall anchors. Tighten each screw gradually until the wall mount sits firmly and evenly against the wall.Do not overtighten the screws.Step 5: Check the InstallationBefore installing your model, gently check the wall mount by hand. The mount should feel solid against the wall with no movement from the anchors, screws, or mounting frame.ImportantThe supplied metal drywall anchors are rated for up to 50 lb each under their specified installation conditions. Actual holding strength can vary depending on drywall thickness, condition, installation, and other factors.Do not install the wall mount into damaged, deteriorated, wet, or otherwise compromised drywall.

At BRICKED UP DESIGNS, we prioritize efficient and timely order processing. Our processing times typically range between 1 to 3 days. While we strive to keep our inventory well-stocked, there are occasions when we need to print an item after it has been ordered. In such cases, we ensure the printing is completed promptly and the item is shipped out as soon as possible. This commitment ensures that you receive your order quickly and in excellent condition.

We operate out of Orlando, Florida!

Welcome to BrickedUp Designs, we're happy you're here! I have been a LEGO enthusiast since building model 2148 with my Dad. In the many years since, I've run out of shelf space; so my passion has evolved into finding better mounting solutions. Using 3D printing I believe I've done just that. With each design I purchase I create a new, and original wall mount that perfectly displays the build. I have worked at taking into consideration not only the best way to display the set but the structural integrity of each build. Even after a long time displayed, it'll still be perfectly intact.